EK-93A 150mm Extrusion Line [EK-93A]
| main wire drawing machine page no.1 | main wire drawing machine page no.2 | main wire drawing machine page no.3 | main wire drawing machine page no.4 | main wire drawing machine page no.5 |
| main extrusion machine page no.1 | main extrusion machine page no.2 | main extrusion machine page no.3 | main extrusion machine page no.4 | main extrusion machine page no.5 |
150mm PVC/PE/LSHF Extrusion Line
1] Main specification: 1) Application: PVC/XLPE/LSHF cable insulation & sheathing. 2) Capacity: 1000kg/hr app.(soft PVC) 3) Screw type: BM Mixing type, L/D=24, C/R=2.8. 4) Conductor dia: 10-70mm/OD 5) Finishing dia: 15-80mm/OD 6) cross head:
(1) 45mm X-head: for 10-45mm cable
(2) 80mm X-head: for 40-80mm cable 7) Auxiliary cable vibration absorbor caterpillar: 1000mm/L. 8) Haul off Caterpillar: 2500kg 9) Pay-off: 2600mm/ODx1600mm/AW Floor traversing type
10) Take up: 2600mm/ODx1600mm/AW Floor traversing type 11) Line speed: 100MPM Max. 12) Driven motor:
(6) 3HP AC motor for bobbin lifter 13) Temperature control: PLC + SCR control 14) Operation panel: Touch screen + push button.
2] Machine composition: 1) 2.6M floor gate type pay-off stand.............1 set 2) 1000mm/L cable vibration absorbor caterpillar..1 set 3) Wire straightened..............................1 set 4) 150mm extruder c/w 2 X-heads...................1 set
(PVC/XLPE screw 1pc & LSHF screw 1pc) 5) Temperature control(PLC+SCR)...................1 lot 6) Hopper dryer & auto-loader.....................1 set 7) Color masterbatch..............................2 sets
1/2
EK-93A 150mm Extrusion Line [EK-93A]
8) Takikawa Laser meter...........................1 set 9) Hot water cooling trough.......................1 set 10) Cooling trough 30 Meters ......................1 set 11) 30KV Takikawa spark tester.....................1 set 12) Belt Type length counter.......................1 set 13) Hot tape length marking........................1 set 14) 2500Kg Haul off caterpillar....................1 set 15) 2.6M floor gate type take up stand.............1 set 16) Motors with control panels.....................1 lot
3] Standard spare parts: 1) High speed fuse for DC motor.....1 pc each 2) High speed fuse for AC motor.....2 pcs each 3) Heater for cylinder..............3 pcs 4) Heater for neck/X-head/die.......3 pcs 5) Die and point for sample.........1 set 6) Cooling blower for cylinder......1 set 7) Thermal couple...................4 pcs 8) Sensor for detector..............2 pcs 9) Limit switch.....................2 pcs
10) Tools box........................1 set
2/2